Adm 20.08(2) (2) During the architect/engineer presentations, selection committee members will be free to ask pertinent questions of the architect/engineer. Each member of the selection committee shall independently complete a pre-developed evaluation form on each architect/engineer appearing before the panel.
Adm 20.08(3) (3) Upon completion of architect/engineer presentations, the selection committee will discuss the overall conclusions derived from presentations and independently complete the evaluation forms.
Adm 20.08(4) (4) The selection committee's recommendation for selection shall be the 2 architect/engineer firms receiving the highest scores.
Adm 20.08(5) (5) The selection committee will submit their first and second recommendation for selection of an architect/engineer to the secretary of the department or the secretary's designee.
Adm 20.08(6) (6) The secretary of the department, or the secretary's designee, will consider the selection committee's recommendations, and inform the selection committee of the results of that consideration.
Adm 20.08(7) (7) The department will confirm the selection with the approved architect/engineer. If deemed necessary, the department may request additional information prior to confirmation.
Adm 20.08(8) (8) Negotiations for contract shall be conducted in the same manner as that specified in s. Adm 20.05 (9).
Adm 20.08(9) (9) After confirmation of the selection, the department shall notify all interviewed architects/engineers informing them of the selection committee action and post results of selection on the department's official website. Any architect/engineer who was interviewed may upon request, inspect the selection committee interview evaluation of their firm.
Adm 20.08 Note Note: The Wisconsin Department of Administration Division of State Facilities official website is www.doa.state.wi.us/dsf. Forms, publications and information regarding architect/engineer selection and proposed projects may be obtained from this website.
Adm 20.08 History History: Cr. Register, August, 1979, No. 284, eff. 9-1-79; correction in (8) made under s. 13.93 (2m) (b) 7., Stats., Register, April, 1999, No. 520; CR 05-069: am. (1), (5), (6), (8) and (9) Register May 2006 No. 605, eff. 6-1-06.
Adm 20.09 Adm 20.09Contract processing.
Adm 20.09(1) (1) The department will prepare contracts and submit them to the architect/engineer for signature.
Adm 20.09(2) (2) Final approval authority for contracts shall be guided by all of the following:
Adm 20.09(2)(a) (a) The approving authority for contracts less than the threshold prescribed in s. 16.87 (3), Stats., is vested in the department secretary, or the secretary's designee.
Adm 20.09(2)(b) (b) Contracts of the threshold prescribed in s. 16.87 (3), Stats., or more must be signed by the department secretary, or the secretary's designee, and forwarded to the governor for approval.
Adm 20.09(3) (3) Change orders to the architect/engineer contract shall be governed by the following:
Adm 20.09(3)(a) (a) The request for a change order to the architect/engineer contract may be initiated by either the architect/engineer or the department representative assigned to coordinate the project implementation.
Adm 20.09(3)(b) (b) Change order requests shall be reviewed by the appropriate department representative coordinating the project implementation and by that employee's supervisor. If the request is approved by the department representative's supervisor, the recommendation shall be processed in the form of a change order and submitted to the department secretary, or the secretary's designee, in accordance with s. 16.87 (3), Stats., for approval.
Adm 20.09(3)(c) (c) A change order to the architect/engineer contract shall contain: specific information which will document the reason for the contract change, a description of the work involved, any change to the schedule, and the maximum cost limit.
Adm 20.09 History History: Cr. Register, August, 1979, No. 284, eff. 9-1-79; CR 05-069: am. (2) (a) and (b) and (3) (b) and (c) Register May 2006 No. 605, eff. 6-1-06.
Adm 20.10 Adm 20.10Performance reporting.
Adm 20.10(1) (1) Upon award of the construction contracts and upon completion of the construction phase, and at any other time deemed necessary, department staff members involved in specific phases of the work will submit independent written evaluations of the architect's/engineer's performance of the professional service to the department's representative who is responsible for the general supervision of project implementation. Similar performance evaluations shall be completed on the consultant(s) of the architect/engineer.
Adm 20.10(2) (2) Individual performance evaluation reports shall be based on evaluation of professional contract services such as, but not limited to the following:
Adm 20.10(2)(a) (a) Design ability to meet program, schedules, and budgets.
Adm 20.10(2)(b) (b) Accuracy and completeness of contract documents as evidenced by the number and character of addenda and change orders required.
Adm 20.10(2)(c) (c) Administration of contracts, payments and construction documents as evidenced by the timeliness of the service rendered.
Adm 20.10(2)(d) (d) Responsiveness to field observations and construction activities and requirements as evidenced by the timeliness of the service rendered.
Adm 20.10(2)(e) (e) Overall professional responsibilities demonstrated.
Adm 20.10(3) (3) The performance evaluation reports shall be the basis for the evaluation summary, prepared by the department.
Adm 20.10(4) (4) The evaluation summary shall contain the significant evaluations of strengths and weaknesses and shall be utilized as a report to the selection committee and a basis for review with the architect/engineer. The summary shall be placed in the evaluation file.
Adm 20.10(5) (5) The evaluation summary will be reviewed with the architect/engineer upon request. An entry may be made in the evaluation file to acknowledge the review with the architect/engineer, rating information, summary, or corrective measures to be taken as pertinent to providing good performance services, and any comments the architect/engineer desires to include as part of the record. The architect/engineer may appeal to the department any portion of the evaluation summary within a period of 30 calendar days after the architect/engineer has been notified of the evaluation.
Adm 20.10(6) (6) The department person who is assigned the responsibility shall present the evaluation summary to the members of the selection committee at the appropriate time.
Adm 20.10(7) (7) The file copy of the evaluation summary shall be available for review by the selection committee, secretary of the department of administration, members of the Wisconsin state building commission, examining board of architects, professional engineers, designers and land surveyors, and the state auditor. The material contained in the evaluation summary may be treated as confidential if it appears that it may unduly damage the reputation of the architect/engineer, and its use by all recipients is to be limited to discussions related to the selection of the architect/engineer for state projects. If it appears that the material contained in the evaluation summary will not unduly damage reputations then it will be open for public inspection and copying pursuant to s. 19.21, Stats., and department policy and procedure.
Adm 20.10 History History: Cr. Register, August, 1979, No. 284, eff. 9-1-79; CR 05-069: am. (4) and (5) Register May 2006 No. 605, eff. 6-1-06.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.